GW Instek GSP-930 User Manual - Manual (Page 194)

GSP-930 User Manual
192
Quick Save
Description The Quick
Save
key is a hot key to save files with a
single press.
The type of file that is saved is pre-configured
with the
Save
key.
By default, the Quick
Save
the key will save screen
shots to the local memory or to an external flash
drive (if inserted).
Supported File
Types Screen, trace, state, limit line, correction,
sequence.
Connect External
Memory To save files a USB flash drive or micro SD
card, insert the appropriate device into the front
panel ports.
Quick Save Setup 1. Press the
Save
key and configure the file Type,
Data Source and Format. See page 187 for
details.
Using the Quick
Save key 1. Press Quick
Save
at any time to save the selected file
type using the settings above.
2. A “Save Finish‼” message will shown at the
bottom of the screen when the save has been
completed.