GW Instek GSP-930 User Manual - Manual (Page 16)

GSP-930 User Manual
14
Span
Sets the span, with options for full
span, zero span and last span.
Amplitude
Sets the amplitude reference level,
attenuation, pre-amplifier
controls, scale and other options
for attenuation and scale.
Autoset
Automatically searches the peak
signal with maximum amplitude
and displays it with appropriate
horizontal and vertical scales.
Control keys
BW/Avg
Sets the resolution bandwidth,
video bandwidth, average type
and turns the EMI filter on/off.
Sweep
Sets the sweep time and gate time.
Trace
Sets traces and trace related
functions.
Display
The Display key configures the
windowing mode and basic
display properties.
Meas
Accesses measurement options
such as ACPR, OCBW,
demodulation measurements,
SEM, TOI and other advanced
measurements.
Limit
Line
Sets and tests Pass/Fail limit lines.
Sequence
Access, set and edit program
sequences.