GW Instek GSP-930 User Manual - Manual (Page 139)

ADVANCED OPERATION
137
For P<31, two additional power limits (shown below)
can be selected via the
Additional Max Out. Pwr
option for Home BS applications:
(The default value for Δfmax is 14.5 MHz. Δfmax can
be user-defined)
6≤P≤20
Unit: MHz Abs [1] RBW
12.5 ≤E< Δfmax P- 56dB 1MHz
P<6
Unit: MHz Abs [1] RBW
12.5 ≤E< Δfmax -50dBm 1MHz
3GPP-FDD BS
Additional
Requirements For operation in bands II, IV, V, X, XII, XIII, XIV and
XXV, additional requirements (listed below) apply in
addition to the minimum requirements listed above.
Bands:
II, IV, X
Unit: MHz Additional [3] RBW
2.5 ≤A<3.5 -15dBm 30kHz
3.5≤B< Δfmax -13dBm 1MHz
Bands: V
Unit: MHz Additional [3] RBW
2.5 ≤A<3.5 -15dBm 30kHz
3.5≤B< Δfmax -13dBm 100kHz
Bands:
XII, XIII, XIV
Unit: MHz Additional [3] RBW
2.5 ≤A<3.5 -13dBm 30kHz
3.5≤B< Δfmax -13dBm 100kHz
3GPP-FDD UE The channel span is set to 5MHz.
Note: A, B, C, D, E denote offsets 1 to 5, respectively.
Unit: MHz
Rel Abs [1] RBW
2.5 ≤A<3.5 -35~-50dBc -71.1dBm 30kHz
3.5 ≤B<7.5 -35~-39dBc -55.8dBm 1MHz
7.5 ≤C<8.5 -39~-49dBc -55.8dBm 1MHz
8.5 ≤D<12.5 -49~-49dBc -55.8dBm 1MHz