GW Instek AFG-2225 User Manual - Manual (Page 14)

AFG-2225 User Manual
14

The UTIL key is used to access the
save and recall options, update and
view the firmware version, access
the calibration options, output
impedance settings and frequency
meter.

ARB is used to set the arbitrary
waveform parameters.



The MOD, Sweep and Burst keys
are used to set the modulation,
sweep and burst settings and
parameters.
Preset Key

The preset key is used to recall a
preset state.
Output Key

The Output key is used to turn on
or off the waveform output.
Channel Select
Key

The channel select key is used to
switch between the two output
channels.
Output ports 
 Ω
 Ω


CH1: Channel 1 output port
CH2: Channel 2 output port
Power Button Turns the power on or off.
Arrow Keys Used to select digits when editing
parameters.