GW Instek AFG-2225 User Manual - Manual (Page 152)

AFG-2225 Series User Manual
152
Set the Vertical Display Properties
Like the horizontal properties, the vertical display properties of the
waveform display can be created in two ways: Setting high and low
values, or setting the center point.
Panel Operation 1. Press the ARB key.

2. Press F1 (Display).
splay 
3. Press F2 (Vertical).
rtal 
Setting the Low
Point 4. Press F1 (Low).
ow 
5. The V_Low parameter will become highlighted.
6. Use the arrow keys and scroll
wheel or number pad to enter
the V_Low value.
 /
  

 



7. Press Clear (F1) to cancel.
lar 
8. Press F2 (Enter) to save the
settings.
ntr 
9. Press Return to return to the
previous menu.
Return
Setting the High
Point 10. Repeat steps 4~9 for V_High
(F2).
h 