GW Instek AFG-2225 User Manual - Manual (Page 194)

AFG-2225 Series User Manual
194
*RST System Command
Description Reset the function generator to its factory default
state.
Note Note the *RST command will not delete
instrument save states in memory.
Syntax *RST
SYSTem:VERSion? System Query
Description Performs a system version query. Returns a string
with the instrument, firmware version, FPGA
revision
Query Syntax SYSTem:VERSion?
Return parameter <string>
Example SYST:VERS?
AFG-2225 VX.XXX_XXXX
Returns the year and version for that year (1).
*OPC System Command
Description This command sets the Operation Complete Bit
(bit 0) of the Standard Event Status Register after
the function generator has completed all pending
operations. For the AFG-2225, the *OPC command
is used to indicate when a sweep or burst has
completed.
Note Before the OPC bit is set, other commands may be
executed.
Syntax *OPC