GW Instek AFG-3000 Series - Manual (Page 191)

REMOTE INTERFACE
191
<NRf+>
<Numeric>
NRf type with a
suffix including
MINimum,
MAXimum or
DEFault
parameters. 1, 1.5, 4.5e-1
MAX, MIN,
<aard> Arbitrary ASCII
characters.
<discrete> Discrete ASCII
character
parameters IMM, EXT,
MAN
<frequency>
<peak deviation
in Hz>
<rate in Hz>
NRf+ type
including
frequency unit
suffixes. 1 KHZ, 1.0 HZ,
ΜHZ
<amplitude> NRf+ type
including voltage
peak to peak. VPP
<offset> NRf+ type
including volt
unit suffixes. V
<seconds> NRf+ type
including time
unit suffixes. NS, S MS US
<percent>
<depth in
percent>
NRf type N/A
Message
terminators LF CR line feed code (new line) and
carriage return.
LF line feed code (new line)
EOI IEEE-488 EOI (End-Or-Identify)
Note ^j or ^m should be used when using a terminal
program.