GW Instek AFG-3000 Series - Manual (Page 270)

AFG-3000 Series User Manual
270
SOURce[1]:ARB:BUILt:EXPRise
Source Specific
Command
Description Creates an exponential rise wave with a specified
start address, length and scale.
Syntax SOURce[1]:ARB:BUILt:EXPRise
[<STARt>[,<LENGth>[,<SCALe>]]]
Parameter <STARt> Start address*: 0~1048,576
<LENGth> Length*: 0 ~ 1048,576
<SCALe> Scale: ±32767
* Start + Length ≤ 1,048,576
Example SOUR1:ARB:BUIL:EXPR 1000, 1000, 100
Creates a exponential rise wave 1000 points in
length with a scale of 100 and a start address of
1000.
SOURce[1]:ARB:BUILt:EXPFail
Source Specific
Command
Description Creates a DC waveform with a specified start
address, length and scale.
Syntax SOURce[1]:ARB:BUILt:EXPFail
[<STARt>[,<LENGth>[,<SCALe>]]]
Parameter <STARt> Start address*: 0~1048,576
<LENGth> Length*: 0 ~ 1048,576
<SCALe> Scale: ±32767
* Start + Length ≤ 1,048,576
Example SOUR1:ARB:BUIL:EXPF 1000, 1000, 100
Creates an exponential fall wave 1000 points in
length with a scale of 100 and a start address of
1000.