GW Instek AFG-3000 Series - Manual (Page 85)

MODULATION
85
FSK Carrier Frequency
The maximum carrier frequency depends on the carrier shape. The
default carrier frequency for all carrier shapes is 1kHz. The voltage
level of the Trigger INPUT signal controls the output frequency
when EXT is selected. When the Trigger INPUT signal is logically
low the carrier frequency is output and when the signal is logically
high, the hop frequency is output.
Panel Operation 1. To select the carrier
frequency, press the FREQ/
Rate key.
2. The FREQ parameter will become highlighted
in the parameter window.
3. Use the selector keys and
scroll wheel or number pad
to enter the carrier
frequency.
4. Press F2~F6 to select the
FSK frequency units.
~
Range Carrier Shape Carrier Frequency
Sine 1μHz~80MHz(3081)/
50MHz(3051)
Square 1μHz~80MHz(3081)/
50MHz(3051)
Triangle 1μHz~1MHz
Ramp 1μHz~1MHz
Pulse 500μHz~50MHz