HT instruments PVCHECK - Manual (Page 28)

PVCHECK
EN - 26
29. Press SAVE to save the results obtained (see § 7.1) or ESC to exit the screen and go back
to the initial screen.
28. After the automatic data transfer phase, the instrument will
display:
 Do not show any results if do not exist on the PV
installation a “stable irradiance” condition more than
the minimum irradiance threshold
 Display the best performance values if during the
recording, the Irradiance values reached the “stable”
condition and its values were higher than the minimum
irradiance threshold
 Unable to carry out the analysis if irradiance has never
reached a steady value higher than the minimum threshold
set, or if no value exists which is valid during the whole
recording (nDC > 1.15).
15/05/12 15:35:00
I r r 7 1 2 W / m 2
P n o m 3 . 5 0 0 k W
T c 4 5 ° C
T e 3 0 ° C
P d c 3 . 1 2 5 k W
V d c 3 8 9 V
I d c 8 . 0 1 A
n d c 0 . 8 8
A n a l y s R e s u l t s
Selection E F F