HT instruments PVCHECK - Manual (Page 47)

PVCHECK
EN - 45
6.4.4.1. Anomalous situations
1. In any operating mode, in case the instrument detects a
voltage higher than 1000V at terminals P-N, P-E and N-
E, it does not carry out the test, gives out a long sound
and displays the message “Vin > 1000”.
15/05/12 15:34:26
I n s . T e s t : 1 0 0 0 V
R i m i n : 1 . 0 M

M o d e : S t r i n g
V t e s t = - - - V
R p = - - - M

Vin > 1000
Selection M

2. In STRING mode, in case the instrument detects an Isc
current higher than 10A, it does not carry out the test,
gives out a long sound and displays the message “Isc
current too high”.
15/05/12 15:34:26
I n s . T e s t : 1 0 0 0 V
R i m i n : 1 . 0 M

M o d e : S t r i n g a
V t e s t = - - - V
R p = - - - M

Isc current too high
Selection M

3. In STRING mode, in case the instrument detects a
current < 0.2A between terminals P and N, it does not
carry out the test, gives out a long sound and displays
the message “Current < Lim”.
15/05/12 15:34:26
I n s . T e s t : 1 0 0 0 V
R i m i n : 1 . 0 M

M o d e : S t r i n g
V t e s t = - - - V
R p = - - - M

Current < Lim
Selection M

4. In STRING mode, in case the instrument detects a
voltage < 15V between terminals P and N, it does not
carry out the test and displays the message “Low
voltage”.
15/05/12 15:34:26
I n s . T e s t : 1 0 0 0 V
R i m i n : 1 . 0 M 
M o d e : S t r i n g
V t e s t = - - - V
R p = - - - M

Low voltage
Selection M
