Operation – KROHNE H250 M40 FOUNDATION FIELDBUS User Manual
Page 15
OPERATION
4
15
H250 M40
www.krohne.com
02/2014 - 4001208201 - AD H250 M40 FF R02 en
PERMITTED
Permitted
RW
Defines the modes which are allowed for an instance of the
block. The permitted mode is configured based on application
requirement.
•
Auto
•
OOS
Setting:
•
Auto
•
OOS
NORMAL
Normal
RW
This is the mode the block should be set to during normal
operating conditions.
Auto
Setting:
•
Auto
•
OOS
ST_REV
ST_REV
ST_REV
ST_REV
Static Revision
R
The revision level of the static data associated with the
function block. The revision value will be incremented each
time a static parameter value in the block is changed.
0
Setting:
0...65635
STRATEGY
STRATEGY
STRATEGY
STRATEGY
Strategy
R/W
The strategy field can be used to identify grouping of blocks.
This data is not checked or processed by the block.
0
Setting:
0...65635
TAG_DESC
TAG_DESC
TAG_DESC
TAG_DESC
Tag Description
RW
The user description of the intended application of the block.
blanks
Setting:
≤32 digits
ACK_OPTION
ACK_OPTION
ACK_OPTION
ACK_OPTION
Acknowledge Option
R/W
Selection of whether alarms associated with the function
block will be automatically acknowledged.
Uninitialized
Setting:
•
Disc Alm Auto Ack
•
Blk Alm Auto Ack
•
Fail Alm Auto Ack
•
Off Spec Alm Auto Ack
•
Maint Alm Auto Ack
•
Check Alm Auto Ack
ALARM_SUM
ALARM_SUM
ALARM_SUM
ALARM_SUM
Alarm Summary
The current alert status, unacknowledged states, unreported
states and disabled states of the alarms associated with the
function block.
CURRENT
Current
R
The active status of each alarm.
Uninitialized
Setting:
•
Discrete Alarm
•
Block Alarm
•
Fail Alarm
•
Off Spec Alarm
•
Maintenance Alarm
•
Check Alarm
UNACKNOWLEDGED
Unacknowledged
R
The unacknowledged state of each alarm.
Uninitialized
Setting:
•
Disc Alm Unack
•
Block Alm Unack
•
Fail Alm Unack
•
Off Spec Alm Unack
•
Maint Alm Unack
•
Check Alm Unack
Uninitialized
UNREPRTED
Unreported
R
The unreported state of each alarm.
Uninitialized
Setting:
•
Disc Alm Unrep
•
Block Alm Unrep
•
Fail Alm Unrep
•
Off Spec Alm Unrep
•
Maint Alm Unrep
•
Check Alm Unrep
Foundation Fieldbus parameters for Resource Block
Parameter
DD Name
Access
Description
Settings
Initial
AD_H250_M40_FF_R02_en_4001208201_PRT.book Page 15 Friday, February 21, 2014 11:25 AM