KROHNE H250 M40 FOUNDATION FIELDBUS - Manual (Page 27)

OPERATION
4
27
H250 M40
www.krohne.com 02/2014 - 4001208201 - AD H250 M40 FF R02 en
PRODUCTION_DATE
production date
R Date of production current production
date
FF_BOARD_INFO FF_BOARD_INFO FF_BOARD_INFO FF_BOARD_INFO
FF Circuit Board Info
FF board informatiom
IDENT_NUMBER
identnumber
R Ident number current ident
number
SOFTWARE_VER
FF software version
R FF software version current version
INDICATOR_TYPE INDICATOR_TYPE INDICATOR_TYPE INDICATOR_TYPE
indicator type
R Type of indicator used by the device M40
OPERATION_HOUR OPERATION_HOUR OPERATION_HOUR OPERATION_HOUR
Operation Hours
R Operation Hour since first power up current operation
hour
PASSWRD PASSWRD PASSWRD PASSWRD
Password
RW password to activate access rights to restricted parameters 0
PROTECT_INFO PROTECT_INFO PROTECT_INFO PROTECT_INFO
access protection
R current protection level to restricted parameters Production
Setting:
• Concentration
• bit 5...6: not use
• User
• Service level
• Production
• Custody Transfer
• Write Lock
SENSOR_DESCRIPTIO SENSOR_DESCRIPTIO SENSOR_DESCRIPTIO SENSOR_DESCRIPTIO
N N N N
sensor description
Detailed sensor type description
METER TYPE
meter type
R meter type of the field device as ordered
Setting:
• H250
• H250 H
• H250 U
• H250 C
• BW25
• Special
NOM_METER_SIZE
nominal meter size
R Nominal meter size of field device as ordered
Setting:
• DN 15
• DN 25
• DN 50
• DN 80
• DN 100
• Not used (in level mode)
Manufacturer specific parameters for Resource Block
Parameter Parameter Parameter Parameter
DD Name Access Description
Settings Initial
AD_H250_M40_FF_R02_en_4001208201_PRT.book Page 27 Friday, February 21, 2014 11:25 AM