Badger Meter Registers User Manual
Page 13
Advertising
![background image](/manuals/371263/13/background.png)
User Manual
If the new value is invalid, the increase sign ( ^ ) or decrease-sign (
) will be displayed while you are programming
When you change data but do not press ENTER, you can cancel the change by waiting for 20 secs or by pressing ENTER for
three secs The PROG procedure will be left automatically and the former value restored
OTEE:
N
Changes will only be set after you press ENTER
Returning to the operator level
In order to return to the operator level, press PROG for three secs If no keys are pressed for 2 minutes, Setup will be
left automatically
Page 13
May 2014
Advertising