Brother PT-9700PC - Manual (Page 25)

Specifying the object name
・ When print data is fed, the command mode should be the P-touch Template mode.
・ When a template is transferred to the machine, all values specified with dynamic
commands are initialized.
・ This is not compatible with split labels.
・ After printing from P-touch Editor, the command mode changes to raster mode. In order to
print a template, select the P-touch Template mode in the P-touch Template Settings tool or,
if the previous mode in the P-touch Template Settings tool was the P-touch Template mode,
turn the machine off, then on again to enter P-touch Template mode.