Brother PT-9700PC - Manual (Page 51)

25
^QV Specify QR Code version
[ASCII] ^ Q V n1 n2
[Decimal] 94 81 86 nd1 nd2
[Hexadecimal] 5E 51 56 nh1 nh2
[Parameters] 0≤n1≤9
0≤n2≤9
[Description]
・ Specifies the QR code version.
(n1*10)+n2:
Version number (between 0 and 40)
・ The default QR code version is 0.
・ This command becomes invalid if a value other than those that can be set (between 0 and
40) has been specified.
・ This command is a dynamic command.
・ If the print range is exceeded, the bar code is not printed.
[Example]
・ To change the version to 10: Since n1=1 and n2=0, the command will be as follows.
^ Q V 1 0 (5Eh 51h 56h 31h 30h)