Brother PT-9700PC - Manual (Page 80)

54
ESC iXF2 FNC1 replacement setting
[ASCII] ESC i X F 2 n1 n2 n3
[Decimal] 27 105 88 70 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 46 32 nh1 nh2 nh3
[Parameters] nh1: 01h (fixed)
nh2: 00h (fixed)
nh3: 00h 01h
[Description]
・ This command selects whether or not GS codes, which are included in bar code protocols
such as GS1-128 (UCC/EAN-128), are replaced with FNC1 codes.
nh3=00h: FNC1 replacement setting OFF
nh3=01h: FNC1 replacement setting ON
・ This command is a static command.
[Example]
・ To disable FNC1 replacement:
ESC i X F 2 01h 00h 00h
(1Bh 69h 58h 46h 32h 01h 00h 00h)