Brother PT-9700PC - Manual (Page 74)

48
ESC iXs2 Special tape setting
[ASCII] ESC i X s 2 n1 n2 n3
[Decimal] 27 105 88 115 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 73 32 nh1 nh2 nh3
[Parameters] nh1: 01h (fixed)
nh2: 00h (fixed)
nh3: 00h 01h
[Description]
・ Specifies whether or not the special tape setting is enabled.
When the special tape setting is ON, the cut settings and chain printing setting are not
available (same as being OFF). When the special tape setting is OFF, the cut settings and
chain printing setting are applied as specified.
nh3=00h: Special tape setting OFF
nh3=01h: Special tape setting ON
・ This command is a static command.
[Example]
・ To use the special tape setting:
ESC i X s 2 01h 00h 01h
(1Bh 69h 58h 73h 32h 01h 00h 01h)