Brother PT-9700PC - Manual (Page 78)

52
ESC iXC2 Specify number of copies
[ASCII] ESC i X C 2 n1 n2 n3 n4
[Decimal] 27 105 88 67 50 nd1 nd2 nd3 nd4
[Hexadecimal] 1B 69 58 43 32 nh1 nh2 nh3 nh4
[Parameters] nh1: 02h (fixed)
nh2: 00h (fixed)
00h≤nh3≤FFh
00h≤nh4≤03h
[Description]
・ Specifies the number of copies to be printed.
nh3+(nh4*256): Number of copies (bytes) (1 to 999)
・ The default number of copies is 1.
・ This command is a static command.
[Example]
・ To change the number of copies to 100: Since nh3=64h and nh4=00h, the command will
be as follows.
ESC i X C 2 02h 00h 64h 00h
(1Bh 69h 58h 43h 32h 02h 00h 64h 00h)