Brother PT-9700PC - Manual (Page 42)

16
^CP Chain printing setting
[ASCII] ^ C P n
[Decimal] 94 67 80 nd
[Hexadecimal] 5E 43 50 nh
[Parameters] 0≤n≤1
[Description]
・ Specifies whether or not chain printing is applied.
n: Chain printing setting
(OFF: 0 (default); ON: 1)
・ This command is a dynamic command.
[Remarks]
・ Invalid if n is a value other than 1 or 0
[Example]
・ To use chain printing:
Since chain printing will be enabled, n=1. Therefore, the command will be as follows.
^ C P 1
(5Eh 43h 50h 31h)