Brother PT-9700PC - Manual (Page 77)

51
ESC iXR2 Specify line feed command text string
[ASCII] ESC i X R 2 n1 n2 data
[Decimal] 27 105 88 82 50 nd1 nd2 datad
[Hexadecimal] 1B 69 58 52 32 nh1 nh2 datah
[Parameters] 01h≤nh1≤14h
nh2: 00h (fixed)
00h≤datah≤FFh
[Description]
・ Specifies the text string for the line feed command.
nh1+(nh2*256): Length of the text string (can be set between 1 and 20)
data: Text string (The maximum number of characters that can be set is 20 characters
(bytes).)
・ The default text string for the line feed command is “^CR”.
・ This command is a static command.
[Remarks]
・ Invalid if more than 20 characters are specified
[Example]
・ To change the text string for the line feed command to “0Dh 0Ah”:
Since the text string to be specified (data), contains 2 characters, nh1=02h and nh2=00h.
Therefore, the command will be as follows.
ESC i X R 2 02h 00h 0Dh 0Ah
(1Bh 69h 58h 52h 32h 02h 00h 0Dh 0Ah)