Brother PT-9700PC - Manual (Page 97)

71
ESC iXC1 Retrieve number of copies setting
[ASCII] ESC i X C 1 n1 n2
[Decimal] 27 105 88 67 49 nd1 nd2
[Hexadecimal] 1B 69 58 43 31 nh1 nh2
[Parameters] nh1: 00h (fixed)
nh2: 00h (fixed)
[Description]
・ Retrieves the number of copies specified to be printed.
・ 4-byte data is returned from the machine.
[1]: 02h (fixed)
[2]: 00h (fixed)
[3, 4]: nh3 nh4 settings
nh3+(nh4*256): Number of copies
・ The retrieved value is a value specified by a static command.
[Example]
・ When the number of copies is set to 500:
If the command ESC i X C 1 00h 00h (1Bh 69h 58h 43h 31h 00h 00h) is sent to the
machine,
02h 00h F4h 01h is returned from the machine. 244 (F4h) + (1 (01h) * 256) = 500
characters