Brother PT-9700PC - Manual (Page 68)

42
ESC iXn2 Select template
[ASCII] ESC i X n 2 n1 n2 n3
[Decimal] 27 105 88 110 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 6E 32 nh1 nh2 nh3
[Parameters] nh1: 01h (fixed)
nh2: 00h (fixed)
01h≤nh3≤63h
[Description]
・ Specifies the number of the template selected from the machine.
n3: Template number (1 to 99)
・ The default selection number is 1.
・ This command is a static command.
[Remarks]
・ The template numbers that can be set are between 1 and 99. This command becomes
invalid if any other value has been specified or if the number that has been specified is of a
template not transferred to the machine.
[Example]
・ To select template number 99:
Since nh3=63h, the command will be as follows.
ESC i X n 2 01h 00h 63h
(1Bh 69h 58h 6Eh 32h 01h 00h 63h)