HP Officejet 7612 Wide Format e-All-in-One - Manual (Page 129)

Solve copy problems
If the following topics do not help, see HP support on page 97 for information about HP support.
● No copy came out
● Copies are blank
● Documents are missing or faded
● Size is reduced
● Copy quality is poor
● Copy defects are apparent
● The printer prints half a page, then ejects the paper
● Paper mismatch
No copy came out
● Check the power
◦ Make sure that the power cord is securely connected, and the printer turned on.
● Check the status of the printer
◦ The printer might be busy with another job. Check the control panel display for information
about the status of jobs. Wait for any job that is processing to finish.
◦ The printer might be jammed. Check for jams. See Clear jams on page 158.
● Check the trays
◦ Make sure that paper is loaded. For more information, see Load paper on page 16.
Copies are blank
● Check the paper
◦ The paper might not meet Hewlett-Packard paper specifications (for example, the paper is
too moist or too rough). For more information, see Paper specifications on page 168.
● Check the settings
◦ The contrast setting might be set too light. On the printer control panel, touch Copy, touch
Settings, touch Lighter/Darker, and then use the arrows to create darker copies.
● Check the trays
If you are copying from the automatic document feeder (ADF), make sure that the originals have
been loaded correctly. For more information, see Load an original in the automatic document
feeder (ADF) on page 15.
Documents are missing or faded
● Check the paper
112 Chapter 8 Solve a problem ENWW