HP Officejet 7612 Wide Format e-All-in-One - Manual (Page 36)

Insert a memory device
Using the USB port on the front of the printer, you can connect a USB flash drive. You can also
transfer files from the USB flash drive to your computer or scan files to the USB flash drive from the
printer.
CAUTION: Attempting to remove a USB flash drive while it is being accessed can damage files on
the USB flash drive. You can safely remove a USB flash drive only when the status light is not
blinking.
NOTE: The printer does not support encrypted USB flash drives.
For more information about USB flash drives that can be used with the printer, see Memory device
specifications on page 176.
To connect a USB flash drive
▲ Insert the USB flash drive to the USB port on the front of the printer.
NOTE: If your USB flash drive does not fit into this port due to size limitations, or if the connector on
the device is shorter than 11 mm (0.43 in), you will need to purchase a USB extension cable in order
to use your device with this port.
ENWW Insert a memory device 19