HP Officejet 7612 Wide Format e-All-in-One - Manual (Page 253)

3. Follow the on-screen instructions.
4. After the setup has completed, the network printer drivers can be installed by opening the
printer's HP folder in Programsor All Programs, clicking Printer Setup and Software , and
selecting Connect a new printer.
TIP: You can also set up wireless communication by entering or changing individual wireless
settings. To change these settings, on the Network tab, click Advanced in the Wireless (802.11)
section on the left, change the wireless settings, and then click Apply.
Change the connection type
After you have installed the HP software and connected the printer to your computer or to a network,
you can use the HP software to change the connection type (for example, from a USB connection to
a wireless connection).
NOTE: If you are changing to a wireless connection, make sure that an Ethernet cable has not been
connected to the printer. Connecting an Ethernet cable turns off the printer's wireless capabilities.
Also, you might be prompted to temporarily connect a USB cable during the setup process.
To change the connection type, do one of the following:
● Change from an Ethernet connection to a wireless connection
● Change from a USB connection to a wireless connection
● Change from a wireless connection to a USB or Ethernet connection
Change from an Ethernet connection to a wireless connection
1. On the printer control panel, touch (Wireless), and then touch Settings.
2. Touch Wireless Setup Wizard, and then touch Continue.
3. Follow the display instructions to complete the setup.
NOTE: If you cannot find the wireless network name (SSID) and wireless password (WPA
passphrase, WEP key), see Before you begin on page 233.
Change from a USB connection to a wireless connection
Follow the instructions for your operating system.
Windows
1. On the computer desktop, click Start, select Programs or All Programs, click HP, select your
printer name, and then click Printer Setup & Software.
- Or -
On the Start screen, click Printer Setup & Software.
2. Click Convert a USB connected printer to wireless.
3. Follow the display instructions to complete the setup.
236 Appendix D Network setup ENWW