HP Officejet 7612 Wide Format e-All-in-One - Manual (Page 95)

Use reports
You can set up the printer to print error reports and confirmation reports automatically for each fax
you send and receive. You can also manually print system reports as required; these reports provide
useful system information about the printer.
By default, the printer is set to print a report only if there is a problem sending or receiving a fax.
A confirmation message that indicates whether a fax was successfully sent appears briefly on the
control panel display after each transaction.
NOTE: If the reports are not legible, you can check the estimated ink levels from the control panel or
the HP software. For more information, see Printer management tools on page 246.
NOTE: Ink level alerts and indicators provide estimates for planning purposes only. When you
receive a low-ink alert, consider having a replacement cartridge available to avoid possible printing
delays. You do not need to replace the ink cartridges until prompted to do so.
NOTE: Ensure that the printheads and ink cartridges are in good conditions and installed properly.
For more information, see Work with ink cartridges on page 88.
This section contains the following topics:
● Print fax confirmation reports
● Print fax error reports
● Print and view the fax log
● Clear the fax log
● Print the details of the last fax transaction
● Print a Caller ID Report
● View the Call History
Print fax confirmation reports
If you require printed confirmation that your faxes were successfully sent, follow these instructions to
enable fax confirmation before sending any faxes. Select either On (Fax Send) or On (Send and
Receive).
The default fax confirmation setting is Off. This means that a confirmation report is not printed for
each fax sent or received. A confirmation message indicating whether a fax was successfully sent
appears briefly on the control panel display after each transaction.
NOTE: You can include an image of the first page of the fax on the Fax Sent Confirmation report if
you select On (Fax Send) or On (Send and Receive), and if you scan the fax to send from memory or
use the Scan and Fax option.
To enable fax confirmation
1. Touch (Right arrow), and then touch Setup.
2. Touch Fax Setup, and then touch Fax Reports.
3. Touch Fax Confirmation.
4. Touch to select one of the following options.
78 Chapter 5 Fax ENWW