HP Officejet 7612 Wide Format e-All-in-One - Manual (Page 159)

Step 4: Make sure the printer is online and ready
If you have the HP software installed, you can check the printer's status from your computer to see if
the printer is paused or offline, preventing you from using it.
To check the printer's status, follow the instructions for your operating system:
Windows
1. Click Start, and then click Printers, Printers and Faxes, or Devices and Printers.
- Or -
Click Start, click Control Panel, and then double-click Printers.
- Or -
On the Start screen, click Control Panel, and then click View devices and printers.
2. If the printers on your computer are not being displayed in Details view, click the View menu,
and then click Details.
3. Do one of the following, depending on the printer status:
a. If the printer is Offline, right-click the printer, and click Use Printer Online.
b. If the printer is Paused, right-click the printer, and click Resume Printing.
4. Try using the printer over the network.
Mac OS X
1. Click System Preferences in the Dock, and then click Print & Fax or Print & Scan.
2. Select the printer, and the click Open Print Queue.
3. If the print job is on hold, click Resume.
4. If the printer is paused, click Resume Printer.
If you can use the printer after performing the steps above but find that the symptoms persist as you
continue to use the printer, your firewall might be interfering. For more information, see Configure
your firewall software to work with the printer on page 145.
If you still cannot use the printer over the network, continue to the next section for additional
troubleshooting help
Step 5: Make sure the HP printer labeled (Network) is set as the default printer driver (Windows only)
If you install the HP software again, the installer might create a second version of the printer driver in
your Printers, Printers and Faxes, Devices and Printers, or View devices and printers folder. If you
have difficulties printing or connecting to the printer, make sure the correct version of the printer driver
is set as the default.
1. Click Start, and then click Printers, Printers and Faxes, or Devices and Printers.
- Or -
Click Start, click Control Panel, and then double-click Printers.
142 Chapter 8 Solve a problem ENWW