Emergency stop buttons – HP Latex 3000 Printer User Manual
Page 15
Label
Explanation
Located internally, close to vacuum fan blades; for maintenance/
service personnel only
Hazardous moving parts. Keep away from moving fan blades.
Identifies the Protective Earth (PE) terminal for qualified
electricians, and bonding terminals for maintenance/service
personnel only. Earth connection essential before connecting
supply.
Emergency stop buttons
There are four emergency stop buttons distributed around the printer. If an emergency occurs, simply push
one of the emergency stop buttons to stop all printing processes. A system error message is displayed, and
the fans turn at maximum speed. Ensure that all emergency stop buttons are released before restarting the
printer.
For safety reasons, access to the print zone is not permitted while printing is in progress. Therefore, if the
front door or the loading table is opened, power to the carriage and to the drying and curing module is
disconnected. The print is cancelled and a system error may be displayed.
ENWW
Safety precautions
9