HP Latex 3000 Printer - Manual (Page 29)

PP and PE film and banner
● Polypropylene (PP) film
● Synthetic paper (such as Yupo)
● Tyvek
● Coated PE/HDPE (polyethylene) banner
PET film
● Polyester (PET) backlit film
● Polyester (PET) frontlit film
● Polyester (PET) grey-back film
Textile
Porous textiles may be used only with the ink collector. To check the porosity of your substrate, see Check
the porosity of your substrate on page 23 .
● Polyester textile and fabric
● Textile banner
● Backdrops
● Textile mesh with liner
● Frontlit textile with liner if porous
● Backlit textile with liner if porous
● Canvas
● Flag and voile with liner
● Cotton textile
● Self-adhesive textile
Wall covering
NOTE: This is an application example, not a selectable category.
● Paper wall covering or wallpaper
● PVC wall covering
● Pre-pasted wall covering
● Non-woven wall covering
● Textile wall covering
● Self-adhesive wall covering
Check the porosity of your substrate
1. If the printer has any substrate loaded, unload it.
2. Cut a piece of self-adhesive vinyl white gloss 15 × 50 mm (0.6 × 2 in) in size.
ENWW Supported substrate types 23