HP Latex 3000 Printer User Manual
Page 289
Advertising
●
Wet print: The ink comes out of the curing module not perfectly dry, and in severe cases the ink can be
smudged by touching it.
Here are some tips for solving both problems:
●
Increase the curing temperature.
●
Increase the curing airflow.
●
Increase the curing temperature and airflow.
●
Decrease the ink density.
●
Reduce throughput.
●
Repeat the Add New Substrate procedure in case you had wrong settings in the substrate preset.
ENWW
Advanced print-quality troubleshooting 283
Advertising