HP Latex 3000 Printer - Manual (Page 220)

Prepare to replace the drying fan array
1. Ensure that you have the necessary Drying Fans Array Kit: for the left drying module (CZ056-67024) or
the right drying module (CZ056-67023). Both kits are included in the Standard Uptime Kit (D4J02A).
2. Ensure that the printer is not printing.
3. Ensure that all windows, covers, and doors are closed and remain in their original position.
4. Move the carriage to the service position.
5. Turn off the printer in the correct way for maintenance operations: see Turn the printer off on page 142 .
6. Stand on the folding steps and open the service position window.
Drying lamps emitter—safety precautions
CAUTION: Disregard of the safety precautions or improper operation of the infrared emitter can lead to
injuries and material damage.
CAUTION: The IR heating device must be operated only by specialists or trained personnel.
The operator of the system must compile specific operating instructions for the training of operating
personnel.
CAUTION: The safety and functional reliability of the IR heating device are guaranteed only in the event of
use of original accessories and spare parts from Heraeus Noblelight.
WARNING! After an emitter break, a dangerous voltage may be exposed to contact by the heating spiral.
Remove the drying module
1. Remove the electrical connector latch.
214 Chapter 8 Hardware maintenance ENWW