Side a: load and print, Side a: unload – HP Latex 3000 Printer User Manual
Page 70
Side A: Load and print
1.
Load the roll-to-roll configuration: see
Load a roll (roll-to-roll configuration) on page 45
.
NOTE:
Neither the dual-roll spindle nor the ink collector kit can be used while printing double-sided
jobs.
2.
Define side A preferences (see
) and select the Print button.
3.
Before unloading the substrate, select the Substrate load/unload button in the IPS, select How to
unload side A, and follow the on-screen instructions.
NOTE:
Jobs must be defined for double-sided printing, side A and side B, this information is available
while a job is printing in Print Properties.
NOTE:
Selecting the check boxes Side B: loading space and Side B: Calibration space is highly
Define double-sided job on page 85
Side A: Unload
1.
Cut the substrate close to the input roll.
64
Chapter 3 Handle the substrate
ENWW