HP Latex 3000 Printer - Manual (Page 228)

2. Reconnect the electrical connector and close the latches.
Finish off replacing the drying quartz glass
1. Close the service position window.
CAUTION: Do not leave anything in the way of the carriage.
2. Turn on the printer in the correct way for maintenance operations: see Turn the printer on on page 143 .
3. Dispose of the old quartz glass according to local regulations.
Replace a curing fan and resistor module
Risk of burns Crush hazard Risk of trapped
fingers
Hazardous moving
part
Light radiation
hazard
Electric shock
hazard
Moving fan blades
For more safety information, see Safety precautions on page 2
222 Chapter 8 Hardware maintenance ENWW