HP Latex 3000 Printer User Manual
Page 66
2.
Unlatch the tension roller at both ends.
3.
Move the roller to the front, so that you have more space to pass the substrate behind the roller.
4.
Pass the substrate through and push the roller backwards, taking care not to trap your fingers between
the roller and the black substrate guide lying underneath and behind.
5.
Close the latches at both sides.
6.
Align the substrate by checking that the substrate edge is in the same position on the input spindle and
tension roller. This can be done by using the rulers on the spindle and tension roller or by measuring the
distance between the right edge and the side plate.
7.
Ensure that the substrate is evenly tensioned and flat (no wrinkles or bumps), and close the tension
roller lever.
8.
Go to the Internal Print Server and press the Finish button as in the roll-to-roll configuration.
60
Chapter 3 Handle the substrate
ENWW