HP Latex 3000 Printer - Manual (Page 151)

Summary of maintenance operations
Table 8-1 Maintenance operations for all substrates
Frequency Maintenance operation Cross-reference Part number and description
Daily Check and clean printheads (from
the Internal Print Server) Check and clean the printheads
on page 104
Check the printer for dust and
aerosol
Check the print output areas for ink
droplets or condensation
Weekly Clean the print zone Clean the print zone on page 149 HP Latex 3000 Printer Cleaning Kit,
provided with your printer
Clean the bottom of the carriage,
the drying glasses, and the line
sensor Clean the bottom of the carriage,
the drying glasses, and the line
sensor on page 150 HP Latex 3000 Printer Cleaning Kit,
provided with your printer
Clean the pinchwheels and drive
roller Clean the pinchwheels and drive
roller on page 154
Check and empty the condensation
collector bottle Empty the condensation collector
bottle on page 115
Every 100 liters
of ink (about
once every 2
months) Clean the ink deposits Clean the ink deposits on page 156
Clean the carriage rails and replace
the oiler foams Clean the carriage rails and replace
the oiler foams on page 160 HP Latex 3000 Printer Cleaning Kit
and Carriage Rail Cleaning Tool,
provided with your printer
Check and empty the oil collector
caps and side trays Empty the oil collector caps
on page 172
Replace e-cabinet fan filters Replace the e-cabinet fan filters
on page 180 HP Latex 3000 Printer Cleaning Kit,
included in your printer
Every 1200 liters
of ink (about
once every two
years) Replace the printhead cleaning
blade Replace the rubber blade
on page 182 CZ056-67391: Printer Maintenance
Kit
When required, use CZ056-67046:
Printhead cleaning blade assembly
Clean the perforated plate Clean the perforated plate
on page 186
Replace the drying lamps and clean
the drying module quartz glass and
air outlet Replace the drying lamps
on page 188 CZ056-67391: Printer Maintenance
Kit
When required, use CZ056-67322:
Drying NIR lamp, included in the
Standard Uptime Kit
Grease the carriage beam screws Grease the carriage beam screws
on page 198 CZ056-67391: Printer Maintenance
Kit
When required, use Q6702-60546:
Machine Grease and Oil Kit
Clean the rear scan-axis beam Clean the rear scan-axis beam
on page 200
5,000,000 cycles
(approx. once
every 5 years) 5,000,000 cycles can be reached by
printing 480,000 m² with 4 passes,
or 320,000 m² with 6 passes, or
190,000 m² with 8 passes To be done by a service engineer.
Call your service representative (see
HP Customer Care Centers
on page 292
).
When required Clean and check the substrate-
advance sensor Clean the substrate-advance sensor
on page 202 HP Latex 3000 Printer Cleaning Kit,
provided with your printer
ENWW Summary of maintenance operations 145