HP Latex 3000 Printer - Manual (Page 245)

Prepare to replace a spindle valve
1. Ensure that you have the Spindle Air Valve (Q6702-67025), which is included in the Standard Uptime Kit
(D4J02A).
2. Ensure that you have an 11 mm (7/16 inch) tube wrench key and the pneumatic gun.
3. Ensure that the printer is not printing.
4. Press the valve to deflate the spindle.
Replace a spindle valve
1. Remove the spindle valve with the tube wrench key.
NOTE: Remember that the dual-roll spindle has two valves; identify the one that needs replacement.
2. Insert the new valve and tighten it. The valve must be well seated in position and firm, but do not force
it with the key.
ENWW Replace a spindle valve 239