HP Tape Library Interface Manager Software - Manual (Page 24)

24 Overview of the Interface Manager (IM) Configuration Chapter 2
Overview of the Interface Manager (IM) Configuration
The IM can be configured through one of several user interfaces:
■ Over a serial port via a terminal or terminal emulation utility
■ Over Ethernet via a Telnet utility, Internet Web browser, or SNMP
management tool
Note Before configuring the Interface Manager, a basic understanding
of Fibre Channel and SCSI devices is recommended.
For information on SCSI standards, refer to publications from the
X3T10 committee of ANSI (American National Standards
Institute). For information on Fibre Channel standards, refer to
publications from the X3T11 committee of ANSI. Approved
American National Standards and Technical Reports may be
purchased from:
ANSI
11 West 42nd Street
13th Floor
New York, NY 10036
Sales Department: (212) 642-4900