Time shown is not correct, Select the [use system date and time] button, Select the [apply] button – HP Tape Library Interface Manager Software User Manual
Page 57: Time shown is not correct 57, Interface manager date and time settings

Chapter 3
Management Operations 57
Chapter 3
Note
DO NOT bookmark Web interface pages with a Web browser.
Because configuration information is transmitted via URLs, there
is the possibility of the IM being configured with information
present at the time a page was book marked.
For similar reasons, it is also recommended NOT to use
navigation features of the Web browser (for instance the [BACK]
button) to navigate the Web interface.
It is recommended to navigate only using the Web page tabs
contained in the Web interface itself
Time Shown is NOT Correct
If the Interface Manager time shown (see
) is not correct, it can easily
be set to match the time on the computer that is running the browser.
1. Select the [Use system date and time] button.
2. Select
the
[Apply] button.
Figure 9
Interface Manager Date and Time Settings