HP Tape Library Interface Manager Software - Manual (Page 7)

7
Installing a New Fibre Channel Interface Card Using Telnet 49
Changing a Fibre Channel Interface Card Configuration Using Telnet 51
Choosing Which Card to be Configured 51
Factory Defaults for the Fibre Channel Interface Card 52
Configuration Using the Web Based Administrator 53
Overview 53
Accessing the Web Based Administrator 55
Making Changes via the Web Interface 56
Changing the Clock Setting Using the Web Administrator 56
Setting Date and Time 56
Time Shown is NOT Correct 57
Setting a Time That is Different From the Time Shown 58
Changing the Ethernet Configuration Using the Web Administrator 58
Using DHCP 59
Not Using DHCP 60
Changing the FC Address Modes Using the Web Administrator 60
Hard Address Settings 62
Soft Address Settings 62
Selecting Your Own Settings 63
Placing a FC Interface Card Off-Line Using the Web Administrator 64
Placing a FC Interface Card On-Line Using the Web Administrator 67
Installing a New Interface Card Using the Web Administrator 70
Download a New Revision of the Firmware 72
Using the Web Interface 72
FTP Interface (All Cards)- Customer Engineer (CE) Only 74
Upgrade Firmware Using FTP 74
FTP Interface (Single Card) 75
Upgrade Firmware Using FTP 75