HP Tape Library Interface Manager Software - Manual (Page 61)

Chapter 3 Management Operations 61
Chapter 3
Figure 11 Interface Manager Fibre Channel Address Modes
One of the advantages provided by using the HP Surestore Interface Manager
is that the addressing modes on any combination of the interface cards can be
modified at the same time.
To change the addressing mode on the interface cards, you must:
1. First change the values shown in the Future Settings fields.
2. When all of the addresses in the Future column are correct, you can
[Apply] them to all of the interface cards at once.
Make note of the settings in the Current Settings fields shown on the screen. If
these are not acceptable, you may choose to edit the Future Settings fields
one at a time, or you may use Hewlett-Packard’s recommended settings.