HP XP7 Storage - Manual (Page 60)

Procedure 7 To define port attributes
1. In the Storage Systems tree, click Ports/Host Groups.
2. In the Ports/Host Groups window, click the Ports tab and select the port to be changed.
3. From the Actions menu, click Ports/Host Groups > Edit Ports.
4. In the Edit Ports window, select a Port Attribute: Initiator or RCU Target.
For all other settings, see the HP XP7 Provisioning for Mainframe Systems User Guide.
5. Click Finish.
6. In the Confirm window, review the settings and enter a task name in the Task Name box.
7. Click Apply to save your settings in the system.
Setting up primary and secondary systems for Cnt Ac-S Z
You configure the storage systems for Continuous Access Synchronous Z by adding a remote
connection from the primary to the secondary system. Adding the connection and setting up remote
paths prepares the systems for Cnt Ac-S Z commands and operations.
Prerequisite information
•
This procedure is performed on the primary system.
•
The primary and secondary system must be ready for Cnt Ac-S Z operations. See “Storage
system preparation” (page 28) .
•
The data path must be set up. See “Data path requirements and configurations” (page 46) .
•
The port attributes on the primary and secondary system must be configured for Continuous
Access Synchronous Z. See
“Defining port attributes” (page 59) .
60 Cnt Ac-S Z configuration