HP NetRAID 1Si Controller - Manual (Page 15)

Chapter 1 Overview of HP NetRAID Utilities
9
HP NetRAID Express Tools Menus
Tools Management Menu
Configure
Initialize
Objects
Format
Rebuild
Check Consistency
Disable BIOS
Change Adapters
Alarm Control
Configure Menu
Easy Configuration
New Configuration
View/Add/Delete Configuration
Clear Configuration
Objects Menu
Adapter
Logical Drive
Physical Drive
SCSI Channel
Battery Backup
Adapter Menu
Reset to Default Settings
Power Fail Safeguard
Memory Type
Read Modify Write Mode
Change Disk Geometry
Disk Spin-up Timings
Cache Flush Timings
View/Update Rebuild Rate
Diagnostics
Adapter Type
Emulation
Auto Rebuild
Initiator ID
Logical Drive Menu
Initialize
Check Consistency
Properties
Physical Drive Menu
Rebuild
Format
Make Online
Fail Drive
Make Hot Spare
Properties
Synchronous Negotiation
SCSI-2 Command Tagging
SCSI Channel Menu
Terminate High 8 Bits
Terminate Wide Channel
Disable Termination
Automatic Termination
SCSI Transfer Rate
Figure 1-3. HP NetRAID Express Tools Menus
(Alarm Control menu is not available for integrated HP NetRAID. Battery
Backup menu is not available for HP NetRAID-1Si or for integrated
HP NetRAID if Battery Backup Module is not present.)