HP NetRAID 1Si Controller - Manual (Page 55)

49
3 HP NetRAID Config
Overview
HP NetRAID Config is a character-based, non-GUI utility that configures and
monitors RAID systems. HP NetRAID Config runs under the following operating
systems:
•
Novell NetWare
•
IBM OS/2
•
SCO OpenServer
•
SCO UnixWare
NOTE The instructions in this section on using HP NetRAID Config
refer specifically to the Novell NetWare network operating
system. Specific features may not be available in all network
operating systems, and the exact location of specific menu
options may vary.
This section describes the following functions:
A. Starting and Exiting HP NetRAID Config
B. HP NetRAID Config Management Menu Options
C. Configuring Arrays and Logical Drives
D. Designating Drives as Hot Spares
E. Initializing Logical Drives
F. Changing Logical Drives Currently in Use
G. Formatting Physical Drives