HP NetRAID 1Si Controller - Manual (Page 32)

Chapter 2 HP NetRAID Assistant
26
Physical
Drives
Server
Selector
Adapter Selector
Toggle
Between
Views
Configuration
Menu Adapter
Menu Physical
Drive
Menu Logical
Drive
Menu Progress
Menu Help
Menu
Figure 2-3. HP NetRAID Assistant Main Window
NOTE Since HP NetRAID-1Si is a single-channel adapter, the
HP NetRAID Assistant Main window for HP NetRAID-1Si
contains only Channel 0 information. In HP NetServer LH 3/3r
and LH 4/4r, the integrated HP NetRAID controller can show
either one or two channels depending upon how many channels
you enabled for HP NetRAID. Integrated HP NetRAID
controllers in other HP NetServers show two channels.
To configure arrays and logical drives, follow these steps:
•
Select adapter to configure.
•
Clear previous configuration, if necessary.
•
Check the Rebuild Rate.
•
Assign global hot spares.
•
Select the Wizard.