HP NetRAID 1Si Controller - Manual (Page 38)

Chapter 2 HP NetRAID Assistant
32
3. Click the Dedicated to button, and then click the down arrow to pull down
a list of valid arrays.
4. Click the array to which you want to dedicate the hot spare.
5. Click OK.
6. Continue defining arrays and hot spares.
To reclaim (undo) one or more hot spares:
1. Select one or more hot spares.
2. Click the Reclaim button to convert the hot spares to Ready physical
drives.
When you are finished defining arrays and hot spares:
Click the Next button.
Define Logical Drives
After you finish defining arrays and hot spares, and click Next, the HP NetRAID
Assistant Wizard Logical Drive Definition window appears. A sample window is
shown in Figure 2-6.
Figure 2-6. HP NetRAID Assistant Wizard Logical Drive Definition Window