HP NetRAID 1Si Controller - Manual (Page 81)

75
4 HP NetRAID Express Tools
Overview
HP NetRAID Express Tools resides in the HP NetRAID BIOS, and is therefore
available to all supported operating systems. This utility duplicates many of the
management functions found in HP NetRAID Assistant and HP NetRAID Config.
Because you must restart the HP NetServer to start HP NetRAID Express Tools, it
is recommended that you use HP NetRAID Assistant or HP NetRAID Config
whenever possible.
However, HP NetRAID Express Tools contains several options that are not
available with HP NetRAID Assistant or HP NetRAID Config. Use HP NetRAID
Express Tools to view or change the following parameters:
•
Adapter Type (also available with HP NetRAID Config)
•
Autorebuild
•
Battery Functions Status (also available with HP NetRAID Config)
•
BIOS Enable/Disable
•
Cache Flush Timings
•
Diagnostics
◊
On-board memory test
◊
NVRAM test
◊
Parity check
◊
DMA test
◊
Timer test
◊
Interrupt test
◊
Hardware register test
•
Disk Spin-Up Timings (also available with HP NetRAID Config)
•
Emulation
•
Initiator ID