HP XP7 Storage - Manual (Page 13)

Use the following workflow to create a snapshot group and store volume snapshot data in the
group:
1. Split the pair and store snapshot data for a group. To do this, using the RAID Manager, run
the following raidcom command:
raidcom modify snapshot -snapshot_data create
2. The host issues a write request to each P-VOL in the group.
Snapshot data for the volumes are stored.
3. Split the pair and store snapshot data for a consistency or snapshot group. To do this, using
the RAID Manager, run the following command:
raidcom modify snapshot -snapshot_data create
How Fast Snap works 13