HP XP7 Storage - Manual (Page 18)

•
“Fast Snap pair restoration” (page 15) .
•
“Fast Snap pair restoration and host server I/O performance” (page 34) .
Sharing FS volumes with other XP7 storage system software applications
You can create FS pairs using pair volumes for XP7 storage system replication software applications,
such as BC and Continuous Access Synchronous (Cnt Ac-S). You can also create FS pairs using
volumes to which you define attributes using Data Retention or RAID Manager.
You can share FS volumes with the following HP software application volumes:
•
Data Retention (see “Sharing volumes and Data Retention access attributes” (page 19) ).
•
Auto LUN (see “Sharing Fast Snap volumes with Auto LUN” (page 21) ).
•
Business Copy (see “Sharing Fast Snap volumes with Business Copy” (page 21) ).
•
Continuous Access Synchronous (see “Sharing Fast Snap volumes with Continuous Access
Synchronous and Continuous Access Journal” (page 23) ).
•
Continuous Access Journal (see “Sharing Fast Snap volumes with Continuous Access
Synchronous and Continuous Access Journal” (page 23) ).
The following table show when you can share FS pair volumes with other XP7 storage system
software application volumes. If a volume that you share with an FS volume is shown in the table,
the pair status determines whether you can perform tasks.
Used as an FS S-VOL Used as an FS P-VOL Software application volume type
No Yes
3
BC P-VOL
No Yes BC S-VOL
No Yes Cnt Ac-S P-VOL
No Yes Cnt Ac-S S-VOL
No Yes Continuous Access Journal (Cnt Ac-J) P-VOL
No Yes Cnt Ac-J S-VOL
No No Cnt Ac-J journal volume
No No Auto LUN source volume
No No Auto LUN target volume
Yes Yes Read Only volume
1, 4, 6
Yes Yes Protect volume
1, 4, 6
No Yes S-VOL Disable volume
4, 6
Yes Yes Zero Read Capacity volume
2, 5, 6
Yes Yes Invisible volume
2, 5, 6
No Yes THP V-VOL
1. If you use RWC to share the volume with other XP7 storage system software applications, the pair status determines
whether you can share the volume.
2. To share the volume with other XP7 storage system software applications, you must use RAID Manager.
3. You cannot Quick Restore.
4. Use the Data Retention to set this attribute.
5. Use RAID Manager to set this attributes.
6. Use the Data Retention to confirm whether this attribute is set to volume.
18 Overview of Fast Snap