Automatic completion of sims, Manually completing sims – HP XP7 Storage User Manual
Page 142
- Shrink the capacity of the THP pool or Smart pool.
•
(For reference code 603000) If a long time has passed since you performed the tasks
listed for reference code 62400 (above), reference code 624000 is reported.
2.
Clear the SIM from the storage system. Depending on the SIM’s reference code, one of the
following occurs:
•
The SIM is automatically completed (see
“Automatic completion of SIMs” (page 142)
).
•
You manually complete the SIM (see
“Manually completing SIMs” (page 142)
).
3.
(Optional) Confirm that the SIM completed normally using RWC (see
).
Related topics
•
For more information about the Pools window and the Complete SIMs window, see the HP
XP7 Provisioning for Open Systems User Guide.
•
For more information about completing SIMs automatically and manually, see the HP XP7
Provisioning for Open Systems User Guide.
•
For more information about checking alerts for SIM reference codes, see the HP XP7 Remote
Web Console User Guide.
Automatic completion of SIMs
SIMs are automatically completed in the following cases:
•
(For reference code 620XXX) The usage level of THP pool number XXX falls below the warning
threshold.
For more information about setting the data pool’s warning threshold, see
.
•
(For reference code 624000) The usage level of each THP pool in all of the pools in the
storage system falls below the depletion threshold.
•
(For reference code 626XXX) The usage level of each THP pool number XXX falls below the
depletion threshold.
NOTE:
The data pool’s depletion threshold is not a value you can set using FS.
SIM reference codes 620XXX, 625000, and 626XXX are automatically completed if you increase
the pool capacity by adding pool-VOLs. Increasing the pool capacity removes the condition that
causes these SIMs.
Manually completing SIMs
You can manually complete the SIMs related to cache management devices to clear them from the
storage system and process pool-related SIMs.
142
Troubleshooting